New Zealand Standard 15M Spray Booth
1. CE approved
2. German Technology
3. Suitable for painting bus and truck
4. Spray booth professional manufacturer
5. Factory price, energy saving
6. High quality, best sell service
7. We can meet at customer's special requirement
Model: custom design
Product:custom design spray booth(15×5×5M) |
Cabin size | |
Internal size | 15000×5000×5000mm ( L×W×H ) |
External size | 15120×7180×5660mm(L×W×H ) |
Basement | |
Basement design type | Without basement, one side extraction, with air collection box return air |
Filter type | Fiber glass filter |
Filter area | 9.7m2 |
Cabin | |
Cabin structure | Wall panel vertical insert |
Plenum chamber height | 600mm |
Wall panel | |
Wall panel | 60mm EPS panel |
Roof panel | 50mm EPS panel |
Material of wrap edge | 1.5mm galvanized steel plate bend forming |
Entrance door | |
Type of entrance door | Hand made entrance door,2+2 structure |
Size of entrance door | 4300×4800 mm (W×H) |
Arrangement and QTY of entrance door | 1 set |
Description of entrance door | With frame inside, fill with EPS |
Middle door | |
Type of middle door | Hand made entrance door,1+1 structure |
Size of middle door | 2200×2700 mm (W×H) |
Arrangement and QTY of middle door | 1 set |
Description of middle door | With frame inside, fill with EPS |
Service door | |
Type of service door | Frame structure |
Size of service door | 800×2000 mm (W×H) |
QTY of service door | 1 set |
Description of service door | With safe glass observation window |
Side lighting | (light box open from outside) |
QTY and power | 18 units, each 2×36W,total 1296W |
Lighting arrangement type | On two sides |
Lighting description | IP55,CE certified electronic ballast, OSRAM brand light |
Ceiling lighting | (light box open from outside) |
QTY and power | 20 units, each 4×36W, total 2880W |
Lighting arrangement type | On two sides |
Lighting description | IP55,CE certified electronic ballast, OSRAM brand light |
Total illumination | >1000Lux |
Filtration system | |
Pre filter | EU3 Grade pocket filter |
Ceiling filter | EU5 Grade filter, model is SP-600G |
Exhaust filter | Fiber glass paint-stop filter |
Inlet system | |
Inlet fan type | Direct drive turbo fan |
Inlet fan power and motor description | 2X7.5KW,970 rpm, 400 V, 50 Hz |
Inlet fan parameter | 28000m3/h,650pa |
Exhaust system | |
Exhaust fan type | Direct drive turbo fan |
Exhaust fan power and motor description | 2X7.5KW,970 rpm,400 V, 50 Hz |
Exhaust fan parameter | 28000m3/h,650pa |
Total air volume | 56000m3/h |
Equipment empty loaded air speed | +/- 0.2m/when empty loaded |
Noise | <78 dB |
Heating system | |
Materials of heat exchanger | Stainless steel 1Gr18Ni9Ti(SUS304) |
Power of heat exchanger | 2X232KW |
△T temperature increase ability | 20°C(from-10°C to 10°C under painting status) |
Max working temperature | 80°C |
Heating time | 10-15 minutes (from 20° to 60ºС) baking status |
Burner model | RS5 natural gas burner |
Ducting configuration | |
Straight duct | 8 pieces |
90 degree | 2 pieces |
45 degree | 2 pieces |
Reducing | 2 pieces |
Control system | |
Performance standard | |
PLC control | Yes, PLC control, higher reliability and lower failure rate |
Distribution facilities | CE standard connection cables, junction box, wire tubes and accessories |
Pressure testing | With pressure gauge to show pressure inside cabin |
Function | Painting, warm painting, baking, leveling, emergency stop swith, failure indication, over temperature alarm indication, baking stop delay protection |
Special item | |
Safety configuration | |
Safety configuration control introduction | Gas pressure sensor mounted above the door,The sensor can identify whether the door is open, when the door is opened, the sensor passes a signal to the main control system.The gas pressure sensor signal on the service door is connected in series with the switch on the door. When the service door is opened, the sensor passes a signal to the main control system, send a command to stop the spray gun supply gas, stop working, and the fan also immediately stop workingA travel switch is installed above the exhaust fan. Throttle pushing gravity work when the exhaust fan is turned on, the limit switch is triggered, exhaust fan normal operation. Work state reservation if the damper open is not in place, it will force other components to stop working, and display failures.Add differential pressure gauge switch at the front end of the fan ,to detect whether the gas supply is normal when the spray paint or other condition.During painting, levelling, baking process, need to change air flow, the change of air flow organization is achieved by the pneumatic actuating mechanism, and set confirm position for travel switch on actuating mechanism, for purpose of safety equipment. |
\BTD Car Tools Co., Ltd is a professional manufacturer for car spraying, baking and largest automobile spraying/baking booth in South China since Year 2002. With strong R&D experiences, advanced technology and guarantee quality, BTD brand spray booth is getting more and more popular all over the world.
BTD target is to be a leading enterprising manufacturer for high-end Spray Paint Booth and painting lines, BTD enjoys good reputation in Europe and hold the most market share for high-end Spray Paint Booth. All of which are compliant to CE directives. We has passed the ISO9001: 2000 quality system certification and ensures that every department follows the articles of the system.
BTD has many agency and establish many showroom around the world, customers can easy find our products in your countryif we have agency and showroom there. Meanwhile, we welcomes partners who are interested to be our agency.
FQA:
Q1: Are you Manufacturer or Trading company?
A: We are a professional manufacturer with our own export department.
Q2: Where is your company ocated? How can I visit there?
A: Our company is located in Guangzhou. All clients, from home and abroad, are warmly welcomed to visit us.
Q3: How about the quality of the products?
A: With the advanced machines, strong and professional R&D team and material
Sources, our products are excellent in performance and craftsmanship.
Q4: What's the sort of heating types?
A: There are diesel, gas and electricity(infrared lamp) heating.
Q5: Does the BTD spray booth with the European design?
A: Our products are welcomed in Europe. All the spray booths are according to European standard with CE certificate.
Q6: What are range of the voltage and power for BTD spray booth when operating?
A: The standard voltage and power for our products is 220V 50Hz 1pH for lights (Residential voltage), 380V 50Hz 3pH for motors (Industrial voltage), we could modify the voltage to suitable for customer's local voltage.
Q7: Can we customize our product?
A: Absolutely yes, BTD has the professional team with 10 years of design experience. Customized material and standard are acceptable. We can provide different standards according to your market and favor.
Our Service:
We provide a design service, with advice on all aspects of all the build, including airflow, ducting, filters, lighting, environmental issues and health and safety issues.
If you wish to discuss any aspect of your project,
Please feel free to contact us.